Hochiki DCP-AMS-KL-LP Manual Pull Station

The Hochiki DCP-AMS-KL-LP is the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single-action and dual-action manual pull stations are available. Resetting the pull station requires either a Cat 30 key or a 1/8″ hex key (depending upon the model used).

On the dual-action model Hochiki DCP-AMS-KL-LP the Lift and Pull cover must be lift before pulling down on the pull station handle. Once the pull station is activate, the handle cannot be put back into a normal standby condition without using the key-operated reset feature.

The DCP-AMS series is electronically addressable and includes a bi-colored status LED. The LED blinks green indicating normal communication with the DCP compatible SLC loop. When an alarm condition is actuate by pulling the handle, the LED will latch Red to indicate the alarm condition.

Models shall be make of 14 AWG CRS and painted with red enamel. The words Fire Alarm shall be in a contrasting color and be embosse text 1/2″ tall. Also, the electronics shall be fully integrate into the manual pull station requiring only a connection to the SLC loop of the control panel. Programming of the manual pull station address must be possible with the manual pull station fully installed.

Features / Specifications

• Addressable integrated design
• Extremely easy to operate
• Bi-colored status LED indicates Standby and Alarm conditions
• Address is programmable in EEPROM
• Address can be programm when installed
• Terminals accept up to 14AWG wire