The Siemens HMS-2S Pull Station from Siemens Canada Limited through their sophisticated control-panel communication. Provide the most advanced method of address to the program and supervise the currently available to the fire industry. In other words Models HMS-SA and HMS-2S are the essences of an intelligent, initiating device through built-in microcomputer-chip technology. As well as each station’s sophisticated, bi-directional communication capabilities with FireFinder XLS. The pull switch and the second-stage key Switch are fully identifiable, and only one (1) pair of wires is need it for the Siemens HMS-2S Pull Station.
On the second-stage, the alarm will activate the key switch to “ON.” The pull switch and the second-stage key Switch are correspondingly fully detectable, and only one (1) pair of wires is necessary for Model HMS-2S.
This is built of course in a strong, molded polycarbonate material, which is matte finished in red with raised white lettering. The housing for each station accommodates the pull-down lever which was operating locks in position,also, will indicate the manual station has been activated. The pull-down lever stays down and locked until the manual station is reset, via initially will open the hinged and use a cover with an Allen Key, following the closing and locking the cover.
Some of the specifications are:
- Two Wire Operation.
- Surface or Semi flush Installation.
- DPU Programs and Verifies Deviceís.
- Address and Tests Deviceís Functionality.
- Electronic Address Programming is Easier and More Dependable.
- Single and Double Action Models Available.