Fire-Lite ANN-100 Fire Alarm Remote Annunciator (New)

The ANN-100 annunciator provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The ANN-100 and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. Connected devices are powered via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply.

Features & Benefits:

• Approved for use in Canada
• Control switches for System Acknowledge, Signal Silence, Drill, and Reset
• Control switches can be independently enabled or disabled at the FACP
• Keyswitch enables/disables control switches and mechanically locks annunciator enclosure
• Enclosure supervised for tamper
• Local sounder can be enabled or disabled at the FACP
• Displays device type identifiers, individual point alarm, trouble, supervisory, zone, and custom alphalabels
• Surface mount directly to wall
• Can be remotely located up to 6,000 feet (1,800 m) from the panel
• Backlight turns off during AC loss to conserve battery power but will turn back on if an alarm condition occurs

Datasheet