The Notifier NC-100 Addressable Control Module provides FireWarden Series intelligent control panels a supervised Class B (Style Y) of Class A (Style Z) circuit for Notification Appliances (horns, strobes, etc.). Addressability allows the NC-100 to be active, either manually or through panel programming, on a select (zone or area of coverage) basis.
Also, each Notifier NC-100 Addressable Control Module uses one of the module addresses on an SLC loop. It responds to regular polls from the control panel and reports its type and status, including the open/normal/short status of its Notification Appliance Circuit (NAC). The LED blinks with each poll received. On command, it activates its internal relay. In addition, the NC-100 supervises Class B (Style Y) or Class A (Style Z) notification or control circuits.
Moreover, upon code command from the panel, the NC-100 will disconnect the supervision and connect the external power supply in the proper polarity across the load device. The disconnection of the supervision provides a positive indication to the panel that the control relay actually turned ON. Also, rotary switches set a unique address for each module. The address may be set before or after mounting. The built-in TYPE CODE (not settable) will identify the module to the control panel.
Features / Specifications
- Built-in type identification automatically identifies these devices to the control panel.
- High noise immunity.
- The wide viewing angle of the LED.
- Used to switch 24 VDC audible/visual power.
Reviews
There are no reviews yet.