The Notifier NOT-BG12LX Manual Dual-Pull Station is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface for any notifier intelligent control panel except FireWarden series panels, and the NSP25 panel. Because the NOT-BG12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm.
The Notifier NOT-BG12LX Manual Dual-Pull Station will mount semi-flush into a single-gang, double-gang, square electrical outlet box, or will surface mount to the model SB-10 or SB-I/O surface back box. If the NBG-12LX is being semi-flush mount, then the optional trim ring may be use. The NOT-BG12LX is usually need for semi-flush mounting with 4″ (10.16 cm) or double-gang boxes (not with single-gang boxes). Pushing in, then pulling down on the handle causes it to latch in the down/activated position.
Once latched, the word “ACTIVATED” (in bright yellow) appears at the top of the handle, while a portion of the handle protrudes from the bottom of the station. To reset the station, simply unlock the station with the key and pull the door open. This action resets the handle; closing the door automatically resets the switch. Each manual station, on command from the control panel, sends data to the panel representing the state of the switch. For use indoors in a dry location