Siemens DT-11 Thermal Detector P/N:500-095430

Siemens DT-11

A Thermal Fire Detector i s of fixed-temperature type. Designed for plug-in use with the standard Fire Safety Series 11 detector base. The thermal fire detector’s element i s self-restoring. The thermal fire detector’s electronics will lock in on ce the alarm i s triggered. The temperature rating for the thermal fire detector i s 135°F (58°C). A lamp i s located on the base of the detector to indicate the initiation of an alarm.

The Thermal Fire Detector, which i s shock and corrosion-resistant, responds only to heat. It i s suitable for use in areas where normal conditions would prohibit the use of other types of detectors. Wh en connected to fire-safety equipment, the detector i s fully compatible with fire-safety ionization detectors. Photoelectric detectors, flame detectors, and manual stations. To operate its alarm-indicating lamp. The thermal fire detector can operate 1 remote indicating lamp or remote relay wh en desired. The engineer shall install the detectors with #18 AWG thermoplastic wire with a 300-volt insulation rating.

Features / Specifications

Self-testing with status-indicating, multi-color LED

Simple twist/lock assembly

Alarm lock-in

Remote function output

Screw-clamp terminals

• UL and ULC Listed; FM, CSFM & NYMEA Approved

Temperature: 32°F (0°C) to 100°F (38°C)

Humidity: Up to 93% RH, non-condensing

Alarm Temperature: 135°F (57°C)

Voltage: 16-27 VDC

Ripple: 3V peak-to-peak

Supervisory Current: 110μA max

Alarm Current: 33-50 mA

Air Pressure: No effect

Datasheet

Relative Item