Notifier RP-2002 fire alarm control panel (New w/Cab)

Notifier RP-2002 with metal box/cabinet. New.

A six-zone FACP for single and dual hazard agent releasing applications. The RP-2002 provides reliable fire detection, signaling, and protection for commercial, industrial, and institutional buildings requiring agent-based releasing.
Compatible with System Sensor’s i3 detectors which are conventional smoke detectors. That can transmit a maintenance trouble signal to the FACP. Indicating the need for cleaning and a supervisory ‘freeze’ signal. When the ambient temperature falls below the detector rating of approximately 45°F. The control panel is compatible with conventional input devices like two-wire smoke detectors, and four-wire smoke detectors. Pull stations, water flow devices, tamper switches, and other normally open contact devices.
Refer to the Notifier Device Compatibility Document for a complete listing of compatible devices.
Four outputs are programmable as NACs (Notification Appliance Circuits) or releasing circuits. Three programmable Form-C relays factory programmed for Alarm, Trouble, and Supervisor. And 24 VDC special application resettable and non-resettable power outputs are included on the main circuit board. Supervises all wiring, AC voltage, battery charger, and battery level.
Activation of a compatible smoke detector. Any normally open fire alarm initiating device will activate audible and visual signaling devices. Illuminate an indicator, and display alarm information on the panel’s LCD. Sound the piezo sounder at the FACP, and activate the FACP alarm relay. And operate an optional module used to notify a remote station or initiate an auxiliary control function.
The RP-2002E offers the same features as the RP-2002 and allows connection to 220/240 VAC. Un less other wise specified, the information in this data sheet applies to the 110/ 120 VAC. And 220/240 VAC versions of the panels.

Datasheet

Relative Item