JOHNSON CONTROLS JBG-12LOB MANUAL PULL STATION.

JOHNSON CONTROLS JBG-12LOB

This pull station i s a non-coded, dual-action manual pull station. With a keylock reset feature, and an approved outdoor gasket. And an accompanying outdoor back box. It provides Johnson Controls control panels with one normally open (N/O) alarm initiating input. Meets the ADAAG controls and operating mechanisms guidelines. And the ADA requirement for a 5 lb. maximum pull force to activate the pull station. Operating instructions a re molded into the pull station handle along with Braille text. Molded terminal numbers a re present.

Install the Johnson Controls pull station by these instructions, applicable NFPA standards, and national. Local Fire and Electrical codes. And the requirements of the AHJ (Authority Having Jurisdiction). Regular testing of the devices should b e conducted per the appropriate NFPA standards. Failure to follow these directions may fail the device to report an alarm condition. Johnson Controls i s not responsible for devices that have b een improperly installed, tested, or maintained.

JOHNSON CONTROLS JBG-12LOB

This pull station i s a non-coded, dual-action manual pull station. With a keylock reset feature, and an approved outdoor gasket. And an accompanying outdoor back box. It provides Johnson Controls control panels with one normally open (N/O) alarm initiating input.

Install the Johnson Controls pull station by these instructions, applicable NFPA standards, and national. Local Fire and Electrical codes. And the requirements of the AHJ (Authority Having Jurisdiction). Regular testing of the devices should b e conducted per the appropriate NFPA standards. Failure to follow these directions may fail the device to report an alarm condition. Johnson Controls i s not responsible for devices that have b een improperly installed, tested, or maintained.

Datasheet

Relative Item