Potter PAD300-PCD Smoke and CO Detector

The Potter PAD300-PCD is a commercial smoke and carbon monoxide detector designed for compatible Potter fire alarm control panels using the Potter Addressable Device protocol. It combines a smoke sensing chamber and an electrochemical carbon monoxide sensor in one low-profile device, providing both fire detection and life-safety CO monitoring.

The smoke detector complies with UL 268 7th Edition enhanced smoke detection requirements, while the carbon monoxide sensing section complies with UL 2075. The detector also features adjustable smoke sensitivity, drift compensation, dirty detector notification, and a 10-year CO sensor with end-of-life indication. This product is intended exclusively for commercial fire alarm installations.

Product Functions

• Detects airborne smoke
• Detects carbon monoxide gas
• Reports smoke and CO alarm conditions to the control panel
• Provides life-safety carbon monoxide monitoring
• Continuously communicates detector status
• Compensates for gradual environmental contamination
• Reports dirty detector maintenance conditions
• Provides CO sensor end-of-life notification
• Supports magnetic smoke detector testing
• Supports walk-test validation of the CO sensor

Electrical & System Information

The PAD300-PCD operates on compatible Potter Addressable Device signaling circuits and receives operating power and communication through the detector base. A digital communication path allows the fire alarm control panel to analyze information from the individual detector and identify its alarm or maintenance status.

The detector is addressed using DIP switches located on the rear of the unit, allowing field configuration without a programming tool. Potter specifies a total system polling speed of less than five seconds for compatible installations.

Features

• Commercial smoke and CO detector
• Combined smoke and carbon monoxide sensing
• Electrochemical CO sensing technology
• UL 268 7th Edition smoke detection
• UL 2075 carbon monoxide detection
• Adjustable smoke sensitivity
• Drift compensation
• Built-in dirty detector warning
• 10-year CO sensor life
• CO sensor end-of-life indication
• DIP-switch addressing
• LED alarm indicator
• Magnetic test switch
• Low-profile housing
• Optional detector locking tab
• UUKL listed for smoke-control applications
• Five-year manufacturer warranty

Mounting & Design

The PAD300-PCD uses a twist-on detector design and installs on compatible PAD300 Series detector bases. The detector and base feature a durable, low-profile off-white enclosure designed to blend with commercial ceilings.

The installed detector is less than two inches high when used with a compatible base. An optional locking feature helps prevent unauthorized detector removal in public or restricted-access locations.

Protection & Applications

Suitable for:

• Office Buildings
• Schools
• Hospitals
• Hotels
• Assisted Living Facilities
• Dormitories
• Healthcare Facilities
• Apartment Common Areas
• Commercial Buildings
• Mixed-Use Properties

Compatibility

Compatible with:

• Potter Addressable Fire Alarm Control Panels
• Potter Addressable Device Protocol
• PAD300 Series Detector Bases
• Compatible Potter SLC Circuits
• Potter Fire Alarm Systems Supporting Smoke and CO Events
• Compatible Remote Indicators and Base Accessories

Always verify compatibility with the installed Potter fire alarm control panel, SLC protocol, detector base, panel firmware, programming configuration, and local code requirements before installation.

Technical Specifications

Manufacturer: Potter Electric Signal Company

Model: PAD300-PCD

Product Type: Addressable Smoke and Carbon Monoxide Detector

Detection Functions: Smoke and Carbon Monoxide

Smoke Detection Method: Smoke Sensing Chamber

CO Detection Method: Electrochemical Sensor

Communication Protocol: Potter Addressable Device Protocol

Smoke Sensitivity Range: 1.1% to 3.5% Obscuration per Foot

Smoke Compliance: UL 268 7th Edition

Addressing: Rear DIP Switches

Drift Compensation: Yes

Dirty Detector Warning: Yes

Status Indicator: LED Alarm Indicator

Testing: Magnetic Smoke Test and CO Walk-Test Mode

Polling Speed: Less Than 5 Seconds on Compatible Systems

Housing Color: Off-White

Profile: Less Than 2 Inches High with Base

Mounting: Compatible PAD300 Series Detector Base Required

Locking Feature: Optional

Smoke-Control Listing: UUKL Listed

Warranty: Five Years

Application: Indoor Commercial Fire Alarm Systems

Listings: UL 268 7th Edition, UL 2075, UUKL, and CSFM listed as applicable. Verify the product label and project requirements before installation.

Applications

The Potter PAD300-PCD is designed for commercial fire alarm systems requiring smoke detection and carbon monoxide monitoring from a single addressable device. Typical applications include hotels, hospitals, schools, dormitories, assisted living facilities, apartment common areas, office buildings, healthcare properties, and other commercial occupancies using compatible Potter Addressable Device fire alarm systems.

PAD300-PCD Datasheet