Notifier NBG-12LXP Manual Dual-Pull Station (Portuguese)
The Notifier NBG-12LXP is just like the NBG-12LX, but in Portuguese. NBG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface for any Notifier intelligent
control panel except FireWarden series panels, and the NSP25 panel. Because the NBG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm.
Notifier NBG-12LXP Manual Dual-Pull Station (Portuguese)
Installation
The NBG-12LX will mount semi-flush into a single-gang, double-gang, or standard 4″ (10.16 cm) square electrical outlet
box, or will surface mount to the model SB-10 or SB-I/O surface backbox. If the NBG-12LX is being semi-flush mounted,
then the optional trim ring (BG12TR) may be used. The
BG12TR is usually needed for semi-flush mounting with 4″
(10.16 cm) or double-gang boxes (not with single-gang boxes).
Operation
Pushing in, then pulling down on the handle causes it to latch
in the down/activated position. Once latched, the word “ACTIVATED” (in bright yellow) appears at the top of the handle,
while a portion of the handle protrudes from the bottom of the
station. To reset the station, simply unlock the station with the
key and pull the door open. This action resets the handle; closing the door automatically resets the switch.
Reviews
There are no reviews yet.