Notifier IMX-1E Fault Isolator Module

The Notifier IMX-1E Fault Isolator Module comes intended for use with analog addressable systems and in conjunction with IDX-751 intrinsically safe photoelectric smoke sensors. Also, the Notifier IMX-1E fault isolator module serves as an interface between the control panel as well as up to a maximum of 15 x IDX-751 smoke sensors. The IMX-1E must also be use in conjunction with a Y72221 galvanic isolator barrier. Besides, to ensure correct operation, the IMX-1E must only be connect to a listed compatible Control Panel.

In general, the IMX-1E must be located within a safe environment. Input module for intrinsically safe detectors for use with addressable control panels. In addition, the detectors can be connected to a line at two wires up to a maximum of ten. Needs to be used in combination with the intrinsically safe barrier. Furthermore, addressing through rotary switches numbered from 01 to 99.

Features / Specifications

• Input Voltage Range: 15 to 32VDC
• Output Voltage: 20 to 24 VDC
• Input Supply Current at 15V: 21mA maximum
• Input Supply Current at 24V: 14mA maximum
• Max Wire Gauge for Terminals: 2.5mm²
• Operating Temperature Range: 0°C to 60°C
• Humidity: 5% to 95% Relative Humidity (non-condensing)
• Height: 70mm
• Width: 70mm
• Depth: 32mm
• Weight: 142g
• Max Wire Gauge for Terminals: 2.5mm²

Download the Specification sheet in *.pdf format

Similar Item