DMD 1161-W Wireless Residential Smoke Detector

DMD 1161-W Wireless Residential Smoke Detector with Sounder and 1162 Smoke/Heat Detector with Sounder are residential, photo-electric wireless detectors used with DMP Wireless. Model 1162 also offers a built-in fixed and rate-of-rise heat detector. Optional integrated fixed 135°F temperature and rate‑of‑rise heat detector. The rate‑of‑rise function detects heat quickly by responding to a rapid temperature increase. The element responds to a rapid rise in temperature and sends an alarm to the panel. The fixed temperature function reacts to heat by responding to the fixed 135° temperature setting. When activated, an alarm is sent to the panel.

Smoke detectors should be tested in place annually using one of the following methods: A. Use DMP Model 526, Smoke! In a Can®, a canned aerosol simulates smoke and follows the directions on the can. B. Use the following steps to test the detector with smoke:

1. Hold a smoldering punk or cotton wick close to the smoke entry openings.

2. Gently direct the smoke into the detector for 20 seconds or until an alarm is indicated.

Testing the Detector Sensitivity The smoke detector provides a sensitivity level test mode that allows you to check the smoke detector sensitivity using the Test/Silence button and the LED indicator on the detector as follows:

1. Press the Test/Silence button on the smoke detector for 2 seconds. Once the test starts, the detector LED flashes one to nine times.

2. Count the number of times the LED flashes and use the following table to determine the status of the smoke detector sensitivity and what action to take, if any.

DMD 1161-W Wireless Residential Smoke Detector

Datasheet Download 

Similar Products