Vigilant GSA-M270 Pull Station Single Action

The Vigilant GSA-M270 manual pull stations is part of Vigilant’s Signature Series system. Also, the Vigilant GSA-M270 Fire Alarm Manual Pull Stations feature our very familiar teardrop shape. Besides, it is made from die-cast zinc and finished with red epoxy powder-coat paint complemented by aluminum-colored stripes and markings. Furthermore, with positive pull-lever operation, one pull on the station handle breaks the glass rod and turns in a positive alarm, ensuring protection plus fool-proof operation. In addition, Presignal models (GSA-M270P) are equipped with a general alarm (GA) keyswitch for applications where two stage operation is required.

In fact, the fire alarm station’s terminal block accepts #18 AWG (0.75mm2) to #12 AWG (2.5mm2) wire sizes. See Signature Loop Controller catalog sheet for detailed wiring requirement specifications.

Features / Specifications

• Traditional familiar appearance
• One stage (GA), two stage (pre-signal), as well as double action models
• Break glass operation together with intelligent device with integral microprocessor
• ADA Compliant
• Electronic Addressing with Non-volatile memory
• Automatic device mapping
• Stand-alone operation
• Diagnostic LEDs
• Designed for high ambient temperature operation
• Operating Voltage: 15.2 to 19.95 Vdc (19 Vdc nominal)
• Operating Temperature: 32ºF to 120ºF (0ºC to 49ºC)
• Storage Temperature: -4ºF to 140ºF (-20ºC to 60ºC) Humidity: 0 to 93% RH
• Operating Current: Standby = 250µA , Activated = 400µA