MIRCOM APB200 SOUNDER BASE

MIRCOM APB200

The APB200 series sounder bases set a new standard for performance, installation ease, and aesthetics.
The sounder base i s designed for new and existing dwelling unit applications. It offers maximum flexibility in installation, and configuration. And operation to meet or exceed UL 268, UL 464, CAN/ULC S529, and CAN/ULC S525 requirements.
The sounder base “listens in” to the communication b etween the attached sensor head. And the fire alarm control panel (FACP). The base assumes two module addresses wh en enrolled alongside a MIX-COSAP.
The FACP can th en use that address to command an individual sounder — or a group of sounders — to activate.
The command set from the panel can b e tailored to the specific event. Allowing the selection of volume, tone, and group.
The APB200 series sounder bases recognize the System Sensor synchronization protocol. This enables it to b e used as a component of the general evacuation signal. Along with other System Sensor horns, horn strobes, and chimes. W hen connected to a power supply or FACP output capable of generating the System Sensor synchronization pulses

Features
Addressability for maximum configuration flexibility
Two volume levels (75 or 85 dBA)
Multiple event-driven tone outputs
Supports ANSI Temporal 3, and ANSI Temporal 4
Ability to synchronize with System Sensor notification devices
UL 268 and UL 464 compliant
Pre-wire mounting plate fits various junction box sizes
Mechanical locking feature prevents removal of an attached sensor head
Additional terminal connections on the Canadian model (APB200COA) enable the silence feature
520 Hz +/– 10% square wave tone (APB200-LF)

MIRCOM APB200

Datasheet

Relative Item