System Sensor BZSPR-SP FUEGO Wall Red Bezel Kit Pack of 5

The System Sensor BZSPR-SP FUEGO Wall Red Bezel Kit Pack of 5 is an interchangeable identification bezel kit designed for compatible System Sensor L-Series wall-mounted speakers and speaker strobes. Each red bezel features FUEGO lettering, providing Spanish-language fire identification without requiring replacement of the complete notification appliance.

The BZSPR-SP is a mechanical accessory only and contains no speaker, strobe, wiring terminals, or active electronics. Each box contains five red FUEGO bezels that snap onto compatible indoor L-Series notification appliances.

---

Product Functions

• Provides Spanish FUEGO identification
• Designed for compatible System Sensor L-Series devices
• Red wall-mount bezel configuration
• Designed for wall speakers
• Supports compatible wall speaker strobes
• Converts compatible FIRE or plain appliances to FUEGO identification where permitted
• Supports ECS and Mass Notification applications
• Allows field customization without replacing the complete appliance
• Snaps directly onto compatible notification devices
• Requires no electrical wiring
• Requires no operating voltage
• Draws no electrical current
• Contains no active electronics
• Supplied as a package of five bezels
• Designed for indoor L-Series applications
• UL/ULC listed accessory family

---

FUEGO Identification

The “-SP” suffix identifies the Spanish FUEGO marking.

System Sensor’s official bezel instructions define the available marking suffixes as:

• -F — FIRE
• -AL — ALERT
• -EV — EVAC
• -AG — AGENT
• -P — Plain / no marking
• -SP — FUEGO / Spanish
• -PG — FOGO / Portuguese

The BZSPR-SP therefore provides clear FUEGO identification for compatible fire alarm voice and notification appliances in installations requiring Spanish labeling.

---

Pack of 5

The BZSPR-SP is supplied as a five-piece bezel kit.

Package Quantity: 5 bezels

System Sensor’s official instructions state that each L-Series bezel pack contains five units, and current product listings identify the BZSPR-SP specifically as a five-pack.

This bulk configuration is useful when several notification appliances within the same project require matching Spanish-language identification.

---

Wall-Mount Configuration

The BZSPR-SP is specifically intended for wall-mounted speaker applications.

The model designation can be interpreted as:

BZ — Bezel
SP — Speaker / Speaker Strobe footprint
R — Red
-SP — FUEGO Spanish marking

Current product documentation identifies it as:

Bezel Kit: Speaker: Wall: Red: FUEGO.

It should not be confused with ceiling-mount bezel models, which use different footprints.

---

Speaker Compatibility

Current product documentation specifically identifies the BZSPR-SP for use with System Sensor:

• SPRL
• SPRL-BP10

The broader BZSPR bezel family is designed around the L-Series wall speaker and compatible speaker-strobe footprint.

Compatibility should always be verified against the exact notification appliance model before installation.

---

Speaker Strobe Applications

The BZSPR bezel family can also be used with compatible L-Series wall speaker-strobe appliances that use the corresponding bezel footprint. System Sensor’s official bezel instructions cover speakers and speaker strobes among the supported L-Series notification appliance categories.

The bezel itself does not alter:

• Speaker voltage
• Speaker wattage
• Audio output
• Strobe candela
• Strobe current
• Synchronization
• Notification circuit operation

All electrical and notification characteristics remain determined by the underlying speaker or speaker strobe.

---

ECS & Mass Notification Applications

System Sensor bezel kits provide field flexibility when notification appliances need identification appropriate for Emergency Communication Systems (ECS) or Mass Notification Systems (MNS).

The available markings allow compatible L-Series appliances to be configured for different signaling purposes without replacing the complete notification device. Current product information specifically describes the bezel kits as suitable for converting compatible fire or plain appliances to markings needed for ECS/MNS applications.

The actual use of FUEGO identification should correspond with the approved system design and applicable requirements.

---

Mechanical Accessory

The BZSPR-SP is not a complete fire alarm notification appliance.

It does not contain or provide:

• Speaker
• Strobe
• Horn
• Audible output
• Visual output
• Operating voltage
• Electrical current
• Speaker transformer
• Candela selection
• Synchronization circuitry
• NAC terminals
• Speaker circuit terminals

Its function is limited to providing the exterior bezel and FUEGO identification for a compatible notification appliance.

---

No Electrical Connection Required

Because the BZSPR-SP contains no electrical components:

Operating Voltage: None
Current Draw: None
NAC Connection: None
Speaker Connection: None
Programming: None
Synchronization Wiring: None

Installation is entirely mechanical.

---

Installation Information

System Sensor specifies a simple snap-on installation procedure:

1. Confirm compatibility with the installed L-Series appliance.
2. Orient the BZSPR-SP correctly to the notification device.
3. Align the bezel with the appliance.
4. Gently snap the bezel into place.
5. Confirm that the FUEGO lettering is properly oriented.
6. Verify that the bezel is securely attached.
7. Confirm that speaker openings remain unobstructed.
8. Confirm that the strobe lens remains unobstructed on speaker-strobe applications.
9. Functionally test the underlying notification appliance.

No separate field wiring or programming is required for the bezel.

---

Environmental Specifications

System Sensor specifies:

Operating Temperature: −40°F to 151°F / −40°C to 66°C

However, the manufacturer’s instructions specifically state that these bezel accessories are intended for indoor System Sensor L-Series models.

Installing the bezel does not change or increase the environmental rating of the underlying notification appliance.

---

Testing & Maintenance

Inspection should confirm:

• Correct FUEGO bezel installed
• Secure snap-on attachment
• Correct orientation
• Clearly visible FUEGO lettering
• No cracks or physical damage
• No paint or contamination
• No obstruction of speaker openings
• No obstruction of the strobe lens
• Proper speaker operation
• Proper strobe operation where applicable
• Proper synchronization where applicable

The underlying notification appliance should continue to be inspected and tested according to System Sensor instructions and applicable fire alarm inspection requirements.

---

Product Identification

• Manufacturer: System Sensor / Honeywell
• Model: BZSPR-SP
• Series: L-Series
• Product Type: Wall Speaker / Speaker Strobe Bezel Kit
• Primary Function: Notification Appliance Identification
• Mounting Application: Wall
• Color: Red
• Marking: FUEGO
• Language: Spanish
• Base Bezel: BZSPR
• Marking Suffix: -SP
• Package Quantity: 5
• Electrical Components: None
• Operating Power: None
• Documented Compatibility: SPRL / SPRL-BP10
• Operating Temperature: −40°F to 151°F / −40°C to 66°C
• Environment: Indoor L-Series applications
• UPC: 783863048623
• Country of Origin: Mexico, subject to change
• Listing: UL/ULC listed accessory family

---

Applications

Suitable for:

• Commercial Fire Alarm Systems
• Emergency Voice Evacuation Systems
• Emergency Communication Systems
• Mass Notification Systems
• Spanish-Language Fire Alarm Identification
• FUEGO-Labeled Notification Appliances
• L-Series Wall Speakers
• L-Series Wall Speaker Strobes
• Multi-Device Fire Alarm Projects
• Fire Alarm System Renovations
• Notification Appliance Identification Changes
• Schools and Universities
• Hospitals and Healthcare Facilities
• Hotels
• Government Buildings
• High-Rise Buildings
• Apartment Buildings
• Institutional Facilities
• Commercial Life-Safety Systems

The System Sensor BZSPR-SP FUEGO Wall Red Bezel Kit Pack of 5 is particularly useful when multiple compatible red L-Series wall speakers or speaker strobes require Spanish FUEGO identification. The five-piece kit provides a simple mechanical way to change appliance identification without replacing the underlying notification equipment.