Simplex 2098-9739 End-of-Line Relay Module

Simplex 2098-9739 End-of-Line Relay Module

Dimensions: 2-1/2” x 1-1/2” x 1” (64 mm x 38 mm x 25.4 mm).

Required for 4-wire circuits using 4098-9682 base, one per circuit; select mounting type as required.

Simplex® TrueAlarm photoelectric detectors provide many of the proven TrueAlarm analog sensing features. For applications where detectors – connected to conventional 2-wire or 4-wire initiating device circuits (IDCs). Each TrueAlarm detector has an on-board microprocessor that evaluates its photoelectric light scattering chamber activity. And makes an intelligent decision based on light obscuration history as to whether an alarm condition is present.
TrueAlarm detectors – packaged in a patented housing that minimizes the visibility of the air intake louvers. Bases are available for remote alarm LED indicator connections and auxiliary relay outputs.

TrueAlarm Smoke Detector Features
Intelligent Data Evaluation. With TrueAlarm analog detection, data from the photoelectric chamber – monitored. And analyzed at the detector to provide a continuously shifting reference point.
Drift Compensation. The data evaluation and its shifting reference point provide a software filtering process. That compensates for environmental factors. And component aging, establishing an accurate reference for evaluating new activity. With this filtering, the resulting drift compensation provides a significant reduction in the probability of false or nuisance alarms.
Magnetic Test Information. Status information is available by performing the magnetic test and observing the detector LED pulses. The LED will normally go directly into alarm with the magnetic test. An off-normal condition. The LED pulses first to indicate the condition and goes into alarm.

Simplex 2098-9739 End-of-Line Relay Module

Datasheet

Relative Item