Siemens MBDC-10 Alarm Bell

Siemens MBDC-10 Alarm Bell
– High sound output with low current draw
– Low-frequency aluminum shells for better audibility through walls, doors
and other structures
– 10” shell size in 24 VDC models
– Integral RFI suppression to minimize induced noise on the NAC circuit
– Mounting options for surface, semi-flush, outdoor, and concealed conduit installation
– Built-in trim plate makes semi-flush mounting simpler and less expensive
– Screw terminals permit fast In / Outfield wiring of #12 to 18 AWG wire

– Polarized for DC supervision of NAC circuits
– Operates on filtered or unfiltered DC
– For combined audible (bell) and visual signaling, a convenient retrofit plate
assemblies are available with multi-Candela strobes
– UL Listed & ULC Listed
FM, CSFM & NYCFD Approved
– Meets OSHA 29 Part 1910.165

Siemens MBDC-10 Alarm Bell Specifications
– Alarm appliances shall be Siemens Series MB vibrating Motor Bells or approved equal
– Alarm appliances shall be UL Standard 464 Listed for Fire Protective Service
– Shells shall be aluminum in 6” or 10” diameter
– Sound output at 10 feet shall be 92 dBA anechoic
– Bells shall incorporate a permanent magnet motor and suppression circuitry
to minimize RFI
– Bells shall include a built-in trim plate for semi-flush mounting to a standard 4” square
back box, or surface mounting to Siemens indoor BBS back box or outdoor WBBS back box
– Retrofit plates Siemens Series ST with multi-Candela strobes shall be used
for bell-strobe applications
– All bell models shall be polarized for line supervision and shall have screw
terminals for In / Outfield wiring of #12 to #18 AWG wire
– Operating voltage range shall be 16-33 volts VDC
– Finish on all models shall textured enamel
– All notification appliances shall listed for “Special Applications”

Datasheet

Similar Item