Gamewell FCI XP95-P Smoke Detector

The Gamewell FCI XP95-P photoelectric sensor constantly monitors its sensing chamber and its internal electronics. The results are then reported along with the unit’s address through the integral communications electronics located in the sensor head. Also, the XP95 photoelectric sensor uses a patented smoke chamber and infrared smoke sensing design. Besides, the infrared emitter generates a burst of light every second, or in response to direct interrogation.

In clean air, the photodiode receives no light from the emitter, due to the arrangement of the chamber. When smoke enters the chamber, it scatters light from the emitter onto the photodiode receptor in proportion to the smoke characteristics and density. As the smoke content in the chamber increases, the signal from the photo diode receptor increases. Furthermore, this information is processed and conditioned by an on-board, advanced-technology ASIC and digitally transmitted to the FACP.

You can connect the Gamewell FCI XP95-P photoelectric device to a two-wire SLC carrying both data and a 17 to 28 VDC supply voltage. It is insensitive to loop connection polarity. A remote LED indicator may be connect. The device is compatible with point-or group-addressable relay and sounder bases.

Features / Specifications

• Contains a four-wire relay base
• Stores the address in the sensor base
• Sets the address by an XPert addressing card
• Provides a two-color status LED
• Includes an optional remote LED
• Offers an infrared smoke sensing design
• Transmits continuous communications

Download the Specification sheet in *.pdf format

Similar Item