Gamewell Fci By Honeywell ATD-RL2F Heat Detector Series, addressable plug-in thermal sensors with integral communication; provide features that surpass conventional sensors. Point ID capability allow each sensor’s address to be set, provide exact locations for pinpointing alarm locations and for select maintenance. ATD thermal sensors use an innovative thermistor sensing circuit to produce 135°F/57°C fixed-temperature (ATD-L2F). The ATD-RL2F provides a combination 15°/minute rate-of-rise with 135° fix thermal detection that is include in a low-profile package. In addition, the ATD-HL2F provides fixed high-temperature detection at 190°F/88°C. These thermal sensors provide cost-effective, addressable property protection in a variety of applications.
The Gamewell Fci By Honeywell ATD-RL2F Heat Detector use a communication protocol that substantially increases the speed of communication between the sensors and Gamewell-FCI analog addressable fire alarm controls. Also, these devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and identifies the single device with the status change. The net effect is response speed up to five times greater than earlier designs.
The ATD plug-in sensors use a separate base to simplify installation, service, andmaintenance. In fact, a special tool allows maintenance personnel to plug-in and remove sensors without using a ladder.
Download the Specification sheet in https://www.gamewell-fci.com/CatalogDocuments/9020-0620_F.pdf*.pdf format