Gamewell-FCI GWPID-95 Point Identification Device

The Gamewell-FCI GWPID-95 Point Identification Device is the interface between the non-powered, normally-open, dry-contact devices. Also, it is designed to operate with the Gamewell-FCI’s 600 Series and ILI95-E3 Series® of analog addressable fire alarm control panels (FACPs). PID monitor a single Style B circuit, as well as they are designed to be mounted in an electrical backbox.

In fact, the Point Identification Device connects to the Signaling Line Circuit (SLC) via two wires. The Gamewell-FCI PID-95 Point Identification Device will monitor, via a two-wire supervised SLC circuit, contact-type devices such as a water flow switch or a manual station. Upon activation of the monitored device, the PID-95 will report its address to the 600 Series or ILI95-E3 Series FACP via the analog SLC. The fire alarm control panel will then activate into all alarm programmed outputs related to the PID-95.

The PID-95 is the interface between the dry-contact type devices together with the SLC of the fire alarm control panel. Use the PID-95 to connect and to identify monitor points without the use of conventional input modules at the main control panel. The use of PID-95s can dramatically reduce the field wiring required on many projects.

Features / Specifications

• Compatible with the Gamewell-FCI, 600 Series and ILI95-E3 Series Systems
• Offers a plate-mounted version available for surface or flush
  mounting in the following dimensions: – 4″ x 4.688″ (10.16 cm x 11.908 cm) double-gang backbox – 4” x (10.16 cm) square backbox
• Includes an LED for alarm annunciation
• Field programmable
• Provides priority interrupt
• Monitors dry-contact devices