System Sensor P2R Horn Strobe

The System Sensor P2R SpectrAlert Advance series of notification appliances offers a wide range of horns, strobes, and horn/ strobes. Also, these products are electrically backward compatible with the previous generation of SpectrAlert notification appliances. Horn/ strobe products are available in two versions. The 2-wire products fit systems where a single NAC controls both horn and strobe.

Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and also 185.

The System Sensor P2R strobe light shall consist of a xenon flash tube and associated lens/reflector system. Furthermore, the horn shall have three audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. Furthermore, on four-wire products, the strobe shall be powered independently of the sounder. The horn on horn strobe models shall operate on a coded or non-coded power supply

Features / Specifications

• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
• Field-selectable candela settings on wall units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and also 185
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone as well as three volume selections
• Universal mounting plate for wall units
• Mounting plate shorting spring checks wiring continuity before device installation
• Electrically Compatible with legacy SpectrAlert devices
• Compatible with MDL3 sync module
• Listed for ceiling or wall mounting