Silent Knight PS-SATK-WP Single Action Pull Station

In general, the Silent Knight PS-SATK-WP manual pull stations feature high-quality, die-cast metal construction. They are available in either single or dual action configurations with SPST switch and terminal strip connections. The normally open contact; which closes when the pull station is activate, is rate for 1 amp, at 125 VAC or 30 VDC. Also, the contacts are gold-plate to avoid the risk of corrosion. All models in the series have been test by UL for compliance with the latest requirements of the Americans with Disabilities Act (ADA).

Furthermore, the single-action pull stations are operate by simply pulling the handle on the front of the Station as far down as it will go; at which point the handle locks into place and is easily visible from up to 50 feet. A scored acrylic break rod is also supply with each unit for applications where it is necessary; the handle is reset by opening the station with a key, placing the handle in the normal upright position, and relocking the station.

The Silent Knight PS-SATK-WP pull station is provided with a gasket and die-cast metal backbox tapped on one end for 1/2” conduit, for surface mounting.

Features / Specifications

• Terminal connections
• Reset using the same keys as Silent Knight enclosures
• Surface mount backboxes are available
• High-gloss red enamel finish on die-cast metal
• Corrosion-resistant gold-plated contacts

Download the Specification sheet in .pdf format

Similar Item