Siemens HS-MC-W Horn Strobe P/n: 500-636071

The Siemens HS-MC-W is a horn strobe multi candela that is listed for indoor use only. Also, all inputs shall be compatible with standard reverse polarity supervision of circuit wiring by the Fire Alarm Control Panel (FACP). Besides, series HS Horn Strobe and standalone Horn Appliances shall have a minimum of three (3) field-selectable settings for dBA Anechoic levels and shall have a choice of continuous or temporal (Code 3) audible outputs. Series HS shall be of low-current design.

The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the Regulated Input Voltage Range and shall incorporate a Xenon flash tube enclosed in a rugged Lexan® lens. The selector switch for selecting the Candela setting shall be tamper resistant. The Siemens HS-MC-W strobes shall not drift out of synchronization at any time during operation. The strobes shall revert to a non-synchronized flash rate if the sync module or Power Supply should fail to operate.

Features / Specifications

• The strobes shall revert to a non-synchronized flash-rate if the sync module or Power Supply should fail to operate
• Synchronization can be accomplish using the Siemens DSC sync modules, FS-250 panel, XLS panel, MXL panel, or PAD-3 power supply with built-in sync protocol
• 4-Wire, Horn Strobe Appliance allows for separate operation of the horn and strobe circuits
• 3 Selectable dBA settings of 90/95/99 dBA Anechoic in both tones
• Wall-mount flush to standard, 4-inch square box, double-gang boxes, or surface mount to MT-SUR-BOX back box