Potter PAD100-PD Commercial Fire Alarm Smoke Detector

The Potter PAD100-PD is a commercial fire alarm smoke detector designed for compatible Potter fire alarm systems. Specifically, it provides dependable optical smoke detection for life-safety applications in commercial buildings. This product is intended exclusively for commercial fire alarm installations and is not surveillance equipment, communications equipment, consumer electronics, tracking equipment, or recording devices.

Built for dependable long-term performance, the PAD100-PD features optical smoke sensing, automatic drift compensation, selectable sensitivity, and a low-profile design. In addition, its durable eggshell white housing blends seamlessly into commercial interiors while supporting reliable fire detection in a wide variety of environments.

Product Functions

The Potter PAD100-PD supports commercial fire alarm systems by providing:

• Optical smoke detection
• Automatic drift compensation
• Continuous sensitivity monitoring
• LED status indication
• DIP switch addressing
• Built-in dirty detector warning
• Reliable operation with compatible Potter fire alarm control panels
• Support for routine inspection and maintenance

Electrical & System Information

The PAD100-PD operates with compatible Potter fire alarm control panels utilizing the Potter Addressable Device (PAD) system architecture. Furthermore, it offers a selectable smoke sensitivity range from 1.0% to 3.7% obscuration per foot, allowing installers to configure the detector according to application requirements.

The detector continuously communicates its operating status while supporting automatic sensitivity compensation and maintenance monitoring. Always verify compatibility before installation.

Features

Optical Smoke Detection

The PAD100-PD uses advanced optical sensing technology to detect airborne combustion particles. As a result, it provides dependable early smoke detection for commercial fire alarm systems.

Automatic Drift Compensation

The detector automatically compensates for gradual dust accumulation and environmental changes. Consequently, it helps maintain consistent detection performance throughout its service life.

Built-In Dirty Detector Warning

Integrated diagnostics monitor detector condition continuously. Therefore, maintenance personnel receive notification when cleaning or servicing is recommended before performance is affected.

DIP Switch Addressing

Rear-mounted DIP switches simplify address configuration without requiring specialized programming equipment. In addition, installers can quickly configure the detector during installation.

LED Status Indicator

The integrated LED provides a clear visual indication of detector status during normal operation, alarm conditions, and maintenance procedures.

Mounting & Design

The Potter PAD100-PD features a compact low-profile housing measuring less than two inches high when installed on a compatible detector base. Furthermore, its eggshell white finish complements modern commercial interiors while maintaining a professional appearance.

The detector installs easily on compatible PAD100 Series detector bases, allowing straightforward installation, inspection, and replacement.

Protection & Applications

The PAD100-PD is designed exclusively for commercial fire alarm systems requiring dependable optical smoke detection.

Typical applications include:

• Smoke detection
• Commercial fire alarm systems
• Office buildings
• Schools
• Healthcare facilities
• Hotels
• Retail facilities
• Warehouses
• Industrial buildings
• Commercial life-safety systems

Always install the detector according to local building codes, fire codes, NFPA requirements, and the manufacturer’s installation instructions.

Compatibility

The Potter PAD100-PD is designed for use with compatible Potter fire alarm control panels and PAD100 Series detector bases.

Compatible bases include:

• PAD100-4DB Standard Base
• PAD100-6DB Standard Base
• PAD100-IB Isolator Base
• PAD100-RB Relay Base
• PAD100-SB Sounder Base
• PAD100-SPKB Speaker Base

Before purchasing or installing this detector, verify compatibility with the intended fire alarm system and project requirements.

Technical Specifications

Manufacturer: Potter Electric Signal Company

Model: PAD100-PD

Product Type: Commercial Fire Alarm Smoke Detector

Detection Technology: Optical Smoke Detection

Operating Voltage: 24 VDC

Standby Current: 300 µA

Status Indicator: One Red LED

Sensitivity Range: 1.0%–3.7% Obscuration per Foot

Addressing Method: DIP Switches

Maximum Addresses per Loop: 127

Maximum Active LEDs per Loop: 30

Operating Temperature: 32°F to 120°F (0°C to 49°C)

Relative Humidity: 0–93% Non-Condensing

Air Velocity Rating: 0–300 ft/min

Housing Color: Eggshell White

Weight (Without Base): 3.56 oz (101 g)

Dimensions (Without Base):

• Height: 1.35 in (34 mm)
• Diameter: 3.93 in (100 mm)

Warranty: 5 Years

Listings: UL Listed, UUKL Listed for Smoke Control

Always verify technical specifications using the manufacturer’s official documentation before installation.

Applications

The Potter PAD100-PD is commonly installed in compatible commercial fire alarm systems serving:

• Office Buildings
• Schools
• Universities
• Hospitals
• Healthcare Facilities
• Hotels
• Government Buildings
• Retail Stores
• Warehouses
• Industrial Facilities
• Commercial Buildings

Before installation, verify compliance with local codes, project specifications, and manufacturer recommendations to ensure proper system operation.

PAD100-PD