The Potter CF-200-MP Fixed Temperature Heat Detector is a fixed temperature only unit. The Model Number prefix “CF” indicates that the detector is Fix Temperature Only, and will therefore not respond to a rate of temperature increase but will operate when the detector fuses at the prescribed (Fahrenheit) temperature as indicated by the model number, i.e. 135,165,200 and 285 degrees. This Potter CF-200-MP Fixed Temperature Heat Detector is a “Fixed Temperature Only, non-restorable”. This is the standard THERMOFLEX™ single circuit, Normally Open contacts detector, in which the connectivity is with pigtail leads that extend through a seal plate.This provides for protection against corrosive or moisture-laden environments.
Features / Specifications :
- Dual Action (Rate of Rise/Fixed Temperature) or Fixed Temperature only.
- Available with protective light hazard guard (specify “MPG” when ordering).
- Up to 70’ inter detector spacing.
- Secure fusible link mechanism locks contacts in alarm state when releasing temperature is right.
- Operating temperature range -40ºF/+250ºF (-40ºC/120ºC).
Reviews
There are no reviews yet.