Notifier XP6-RA Control Module

Notifier XP6-RA

A Six Relay Control Module provides an intelligent fire alarm system with six Form-C relays. The first module i s addressed from 01 to 154. Wh ile the remaining modules a re automatically assigned to the next five higher addresses. Provisions a re included for disabling a maximum of three unused modules. A single isolate set of dry relay contacts i s provided for each module address. Which i s capable of b eing wired for a normally open or normally closed operation. The module allows the control panel to switch these contacts on command. No supervision i s provided for the controlled circuit. The Relay Control Module has a panel-control green LED indicator. The panel can cause the LEDs to blink, latch on, or latch off.

Features / Specifications

Standby current: 1.45 mA (SLC current draw with all addresses used. If some addresses a re disabled, the standby current decreases).

Temperature range: 32°F to 120°F (0°C to 49°C).

Humidity: 10% to 93% non-condensing.

Dimensions: 6.8″ (17.27 cm) high x 5.8″ (14.73 cm) wide x 1.0″ (2.54 cm) deep.

Shipping weight: 1.1 lb. (0.5 kg) including packaging.

Wire gauge: 12 AWG (3.25 mm²) to 18 AWG (0.9 mm²).

Maximum SLC wiring resistance: 40 or 50 ohms, panel dependent.

Relay current: 30 mA/relay pulse (15.6 ms pulse duration), pulse under panel control.

Relay contact ratings: 30 VDC; 70.7 VAC.