Notifier NH-200R Fixed Temperature Heat Detector

The Notifier NH-200R is an addressable thermal detector with a built-in rate-of-rise sensor.

The Notifier NH-200R Series intelligent thermal detectors are designed for both performance and aesthetics and are direct replacements for the NH-100 Series. A new modern, sleek, contemporary design and advanced thermal technologies make the NH-200 Series ideal for both system operation and building design. The point ID address set using rotary decimal switches, provide specific detector locations.

Compatible with FireWarden® Series fire alarm control panels, the series includes a 135°F/57°C fixed-temperature, rate-of-rise, and a 190°F/88°C fixed high-temperature detectors. Also, these thermal detectors provide effective, intelligent property protection in a variety of applications. Detectors are available for both FlashScan® and CLIP applications as designated. NH-200R Series plug-in intelligent thermal detectors use a detachable base to simplify installation, service, and maintenance.

In fact, each Notifier NH-200R Series detector uses one of the panel’s addresses (total limit is panel dependent) on the FireWarden Signaling Line Circuit (SLC). It responds to regular polls from the control panel and reports its type and status. If it receives a test command from the panel (or a local magnet test), it stimulates its electronics and reports an alarm. It blinks its LEDs when polled and turns the LEDs on when commanded by the panel. Besides, the NH-200R Series offers features and performance that represent the latest in thermal detector technology.

Features / Specifications

• Two-wire SLC loop connection
• The unit uses a base for wiring
• Addressable by device
• Sleek, low-profile, stylish design
• Fixed temperature factory preset to 135°F (57°C)
• Sealed against back pressure
• SEMS screws for wiring of the separate base

Download the Specification sheet in *.pdf format

Similar Item