NOTIFIER ACM-30 AIO Annunciator (NEW)

The ACM-30 annunciator provides the NOTIFIER™ INSPIRE™ Series N16 FACP (Fire Alarm Control Panels) or NCD (Network Control Display) with remote, serially-connected annunciators. Arrays of LEDs indicate, locally within the FACP or at a remote location, the status of addressable points within the system. The ACM-30 annunciators are designed to serve as full function annunciators that can both receive status information as well as transmit commands to the control panel. This allows the annunciator to remotely execute functions of the control panel in addition to displaying the status of the system.
Common system functions such as signal silence, system reset, and local annunciation controls (local acknowledge and lamp test) are controlled through touchpoints on the annunciator’s keypad. Each button on the ACM-30 can be programmed to either cooperate with its coordinating LEDs or to operate independently. All buttons and LEDs are customizable. There is no fixed system function on the ACM-30. Using Independent mode, a single ACM-30 could be configured to have 60 point indicators.
Communication between the FACP or NCD and these annunciators is accomplished over a power-limited, two-wire serial interface called the AIO Bus and can be connected to both the main and local bus. Power for the ACM-30 is provided via a separate power-limited power loop from the control panel which is inherently supervised by these annunciators (loss of power results in an annunciator communication failure at the control panel).
The N16 FACP supports a maximum of 80 annunciators. Up to 10 ACM-30 annunciators can be configured as routers with each router supporting up to15 ACM-30 peripheral annunciators.
The capacitive touch keypad of the ACM-30 has 30 buttons with two corresponding LEDs. The LEDs can be programmed for red, green, yellow, white, amber, blue, cyan or purple. The keypad header has
two additional LEDs and buttons intended for use as an On-Line/Power LED, System Trouble LED, Lamp Test button and Silence/Acknowledge switch. Each Annunciator also contains a local piezo sounder for audible indication of alarm and trouble conditions at each annunciator

Datasheet