Honeywell TC810R1024 Intelligent Relay Control Module

The Honeywell TC810R1024 Addressable Relay Module provides the system with a dry contact output for activating a variety of auxiliary devices, such as fans, dampers, control equipment, etc. Addressability allows dry contact activated, either manually or through panel programming, on a select bas through panel programming, on a select basis.

Honeywell TC810R1024 uses on of 159 possible module addresses on a SLC loop. Additionally, It responds to regular polls from the control panel and reports its type and status, including the open/normal/short status of its Notification Appliance Circuit. Also, the LED blinks with each poll received. On command, it activates its internal relay.

If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs.

Features / Specifications

• Built-in type identification automatically identifies these devices to the control panel.
• Internal circuitry and relay powered directly by two -wire SLC loop. The TC810N1013(CDN) module requires power
• Integral LED “blinks” g inks” green each time a communication is received from the control panel and turns on in steady red when activated.
• LED blink deselected globally
• 32°F to 120°F
• Humidity: 10% to 93% non-condensing
• Voltage: 15 to 32 VDC
• 6.5 mA current draw
• EOL resistance: not used

Download the Specification sheet in *.pdf format

Similar Item