Notifier ABS-1B Annunciator Surface Box

Notifier ABS-1B Annunciator Surface Box

The ONYX® Series ACS Annunciators provide a modular line of products.
The ACS line provides arrays of LEDs to indicate point status. In some versions, switches control the state of output circuits. These ACS units use a serial interface. Located at distances of up to 6,000 feet (1,828.8 meters) from the panel.

The ACS modules are provided in two basic controller modules, each with its expander module.

The ACS Series annunciator and control subsystems use modular hardware assemblies. Allow the custom configuration of the annunciator panel to fit the individual job requirements.
Standard backboxes and mounting hardware schemes, including special remote cabinets. Allow the annunciators – constructed and configured with other system components.
The ACS modules – used for the manual selection of speaker and telephone circuits. This application, typically mounted in the main control near the microphone and telephone handset.
For remote annunciation applications, the modules – typically mounted in special ABF or ABS boxes. Control switch key
locks (AKS-1B) available.
Communication – made through an EIA-485 multi-drop loop. Four wires – required, two for the EIA-485 communications (twisted pair), and two for 24 VDC regulated power.
Retrofit of ACS Series annunciators into existing systems easily accomplished. Software may require upgrading, and some legacy panels may require an interface board.
All field-wiring terminations use removable, compression-type terminal blocks for ease of installation, wiring, and circuit testing.

The ACS Series annunciator and control system provides the NOTIFIER system with up to 32 remote serially connected annunciators.
The NFS2-3030 and NCA-2 are capable of using the full 96 points.
Local or remote power supplies and serial communications allow the ACS to be located virtually anywhere in the protected premises.
Notifier ABS-1B Annunciator Surface Box

Datasheet

Similar Item