Notifier ABF-2DB Annunciator Flush Box
The ACS Series annunciator and control subsystems use modular hardware assemblies. Allow the custom configuration of the annunciator panel to fit the individual job requirements.
Standard backboxes and mounting hardware schemes, including special remote cabinets. Allow the annunciators to – constructed and configured with other system components.
In this application, they – typically mounted in the main control near the microphone and telephone handset.
For remote annunciation applications, the modules – typically mounted in special ABF or ABS boxes. Control switch key locks (AKS-1B) are available.
Four wires – required, two for the EIA-485 communications (twisted pair), and two for 24 VDC regulated power.
Retrofit of ACS Series annunciators into existing systems – easily accomplished. Software may require upgrading, and some legacy panels may require an interface board.
All field-wiring terminations use removable, compression-type terminal blocks for ease of installation, wiring, and circuit testing.
The ACS Series annunciator and control system provides the NOTIFIER system with up to 32 remote serially connected annunciators. Each with a capacity of 96 points, for a total capacity of 3072 points.
The NFS2-3030 and NCA-2 are capable of using the full 96 points.
Local or remote power supplies and serial communications allow the ACS to be located virtually anywhere in the protected premises.
On NFS-320, NFS2-640, NFS2-3030, NCA-2 and the legacy panels, system alarm, and/or trouble conditions. Annunciated on a per-point basis, or in a grouped or zone configuration.
Notifier ABF-2DB Annunciator Flush Box
Reviews
There are no reviews yet.