Fire-Lite CMF-300-6 Control Module

Fire-Lite CMF-300-6 Control Module

General
FireLite’s CMF-300-6 six-circuit supervised control module provides intelligent alarm systems with supervised monitoring of wiring to load devices. Each module – intended for switching applications involving AC or DC which require wiring supervision. Upon command from the control panel, the CMF-300-6 will disconnect the supervision. They connect the external power supply across the load device.
The first module – addressed from 01 to 154 (MS-9600 series only). On an MS-9050UD, MS9200, or MS-9200UDLS, the addressing would be 01 to 94.
Each CMF-300-6 module has terminals for connection to an external supply circuit. For powering devices on its notification appliance circuit (NAC). One or multiple power supplies may – used.
NOTE: Provisions – included for disabling a maximum of three unused addresses.
Each CMF-300-6 module features a short-circuit protection monitor to protect the external power supply against short-circuit conditions on the NAC. Will not – allowed to close if a short-circuit condition currently exists on the NAC. The CMF-300-6 module will close all circuits that – not shorted to find the NAC with the problem.
Each CMF-300-6 module has panel-controlled green LED indicators. The panel can cause the LEDs to blink, latch on, or latch off.
The SYNC-1 accessory card provides the CMF-300-6 with additional functionality with compatible System Sensor®
SpectrAlert® and SpectrAlert Advance® audio/visual devices.
Features
Six addressable Style B (Class B) or three addressable Style D (Class A) outputs that function as notification appliance/telephone circuits.
Removable 12 AWG (3.31 mm²) to 18 AWG (0.821 mm²) plug-in terminal blocks.
Status indicators for each point.
Unused addresses may – disabled.
Rotary address switches.
LiteSpeed® or CLIP operation.
Mounting hardware included.
Fire-Lite CMF-300-6 Control Module

Datasheet

Similar Item