The Fike Control Module (P/N 55-042 & 55-047) is used to switch an external power supply to notification appliances or release solenoids used for sprinkler operation, or to activate Fike’s Masterbox Interface module (P/N 10-2413), which is used on a Local Energy Type Auxiliary Fire Alarm System. Also, the module is capable of Class A or Class B wiring. The device will monitor the wiring (while external power is not switched to the auxiliary devices) to the connected device for open and short circuits. Additionally, the module will monitor the external power input for loss of power (DC voltage supplies only). Furthermore, the isolator version of the module (P/N 55-047) provides complete short circuit isolation for installations requiring NFPA Style 7 wiring.
The module is compatible with Fike’s CyberCat® and Cheetah® Xi intelligent control panels. Its operating parameters configured using the panel’s programming software as well as stored within non-volatile RAM in the module. This on-board intelligence allows each module to communicate its status directly to other devices connected to the panel. Also, this peer-to-peer digital protocol results in less information sent between the module and the host control panel, resulting in faster, more reliable communication.
Features / Specifications
- 55-042 Operating Voltage: 15 to 30 VDC
- Standby Current: 630 mA max. average
- Alarm Current: 2 mA
- Maximum NAC Circuit Wiring Resistance: 100 ohms
- Power Supply Monitor: Normal Range: 9 to 80 VDC ; Trouble Range: 0 to 2 VDC
- Temperature Range: 32 to 120°F
- Humidity: 10 to 93% RH
- Mounts to a 4” x 4” x 2 1/8” Junction Box for flush mounting or also on a surface mount box
Reviews
There are no reviews yet.