Bosch FAP-440 Analog Photoelectric Detector

The Bosch FAP-440 Analog Detectors are open-area smoke detectors of which some models are enhanced with heat or heat and CO sensors. The detectors work with the FPA‑1000 Analog Addressable Fire Panels. Use the detectors with the FAA‑440 bases to provide general life safety and also property protection.

The Bosch FAP-440 Analog Detectors have a valid address range from 1 to 254. Set the address using rotary switches on the back of each detector.

The detector head has a multi‑color LED to indicate status. To verify detector power and analog addressable loop communication, the LED indicator flashes green when operating normally.

Through panel parameter setting, it is possible to turn on or off operation of the polling indicator. Also, in the event of an alarm condition, the detector LED always shows a steady red light. Furthermore, independent from the actual number of activated device LEDs and remote indicator LEDs, the number of activated LEDs limited to five.

The detectors are part of a two‑piece modular design for detector assemblies. An FAP‑440 Analog Detector attaches to an FAA‑440 Family base. Furthermore, the base’s security locking tab hinders unauthorized detector removal from the base.

The sensitivity of the smoke sensor is programmable with 12 levels from which to choose. Additionally, throughout the normal life cycle, the smoke detector monitors itself against the factory calibrated level and periodically compensates itself to keep the sensitivity at the programmed level.

Download the Specification sheet in *.pdf format

Similar Item