Universal Lighting C218UNVME000K Electronic Ballast

C218UNVME000K Electronic Ballast

APPLICATION and PERFORMANCE SPECIFICATION

Description: Electronic compact fluorescent ballast(s) for (2/1) CFQ18W/G24q or (2/1) CFM18W/GX24q or (2/1) CFS21W/GR10q (2D) 4 pin lamps.

APPLICATION and PERFORMANCE SPECIFICATION

• Line Voltage: 120vac – 277vac, ±10%, 50-60Hz • Programmed Rapid Start
• High Power Factor • Series Lamp Connection

Performance: Safety:
Meets ANSI Standard C82.11 • No PCB’s.  FCC Part 18 (Non-Consumer), Limits for EMI/RFI • CULUS listed (Class P). The Operating Frequency Range: 50-60 kHz Type 1 Outdoor, Type CC, Type HL.
The Auto-Reset Shutdown Circuit per NEMA Recommendations
Lamps should – replaced at the end of life and relight upon insertion in the socket
Use in air handling spaces – NEC wiring guidelines – followed

Input Terminals L N G intended for one supply connection only Application: Physical Parameters
The Minimum Starting Temperature: 0° F, -18° C – Length: 4.94″
The Maximum Case Temperature (@ tc): 167° F, 75° C Width: 2.31″, Sound Rated: A Mounting: 4.61″
Configuration: Height: 1.00″ xxx = ME – Multi Exit – Weight: Weight: 0.57 lbs 0.57 lbs or MES. Multi-Exit with Studs (2″ on center) Qty/Carton: 20
• Remote Mounting 20 feet Color: ME/MES-White
• 18W applications operate on 125VDC input (+)L (-)N Can Material: Metal
Warranty:
Universal Lighting Technologies warrants to the purchaser. Each electronic ballast will be free from defects in material or workmanship for 5 years from the date of manufacture. Properly installed and under normal conditions of use. Call 1-800-BALLASTx800 for technical assistance.
Manufactured in North America
Ballast has a plug-in Installed by wire trap connectors. National Electrical Code. Use 18 AWG solid copper wire, stripped to 3/8″.
The ballast Must – Grounded.
Use External Ground Wire.

C218UNVME000K Electronic Ballast

Datasheet

Relative Item