System Sensor SPSWH Wall Speaker Strobe 902

System Sensor SPSWH – SpectrAlert Advance speaker and speaker strobes shall mount to a 4 × 4 × 21⁄8-inch back box. A universal mounting plate used for mounting ceiling and wall products. Additionally, the notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance speaker strobes, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; Also, 24-volt rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Besides, indoor SpectrAlert Advance products shall operate between 32°F and 120°F from a regulated DC, or full-wave rectified, unfiltered power supply

In general, System Sensor SPSWH – The speaker shall be a System Sensor SpectrAlert Advance model dual-voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms. It’s listed as UL 1480 and shall be approved for fire protective service. The speaker shall have a frequency range of 400 to 4,000 Hz and shall have an operating temperature between 32°F and 120°F. The speaker power taps and voltage selected by rotary switches.

Features / Specifications

• Discontinued; Replacement: SPSWL
• 10 to 93% non-condensing Humidity
• 400 to 4000 Hz
• Plug-in design
• Tamper-resistant

Download the Specification sheet in *.pdf format

Similar Item