Simplex 4100-3107IDNet Module (New)

The 4100-3107 IDNet+ module (shown below) provides a single IDNet channel with four isolated output circuits allowing the System CPU to communicate with up to 246 IDNet peripherals, such as smoke detectors and pull stations. Each IDNet Circuit (A, B, C, and D) is individually isolated by the IDNet+ module in case of a short circuit. If a short circuit occurs on one or more output circuits, the short circuits are isolated and do not affect IDNet channel communications on other circuits.
Overview
Each circuit has terminations for Class A or Class B wiring, selected by the configuration of two jumpers. Class B wiring requires the configuration jumpers set to Position 1-2 (see Figure 1). If required, the IDNet+ module is capable of supporting both Class A and B Circuits. When configured for Class B operation, the B+, B- and A+, A- Terminals are “T-tapped” on the IDNet channel and may be used for connecting to IDNet devices on separate runs such as the existing zone wiring in a retrofit installation (see “Class B Wiring” section later in this publication).

Datasheet