Simplex 4010-9502 Fire Alarm Control Panel (New)

Releasing control using the Simplex

Alarm Control Panel to provide**:

– Coverage for up to 10 hazard areas of Automatic Extinguishing Release and/or Deluge and Preaction Sprinkler System Release

– Releasing Appliance Circuit (RAC) control of compatible Listed/Approved 24 VDC automatic control actuators, one per circuit; or two 12 VDC actuators in series per circuit

– RAC provides short circuit supervision to coil supervision module

– Four, 2 A Notification Appliance Circuits (NACs) in the panel for use with Suppression Release Peripherals (SRP)

– Additional actuator circuit control and additional NACs are available using 4009 IDNet Addressable, NAC Extenders and Suppression Release Peripherals Audible

– Escalation of Events:

 NOTE: Requires NACs dedicated to conventional horn control (not Smart Sync operation) with strobes controlled on separate NACs 4009 IDNet NAC Extenders provide:

– Up to eight NACs for notification requirements and for NAC input to Suppression Release Peripherals

– Control is via IDNet addressable communications 4090-9005/-9006 Suppression Release Peripheral with Dual Command Control:

– Dual command control requires that both IDNet communications commands and an activated NAC are present to initiate the desired release

– NAC provides wiring supervision to the actuator including monitoring of coil continuity Suppression Release Peripheral control features:

– An on-board DC-DC regulator compensates for voltage drops to the peripheral and ensures proper control circuit voltage over a wide operating range

– Provides a single RAC for control of actuators for up to 1 A using a 2 A NAC input Related system components:

– 4010 Series control panel with Releasing Appliqué

– Dedicated NAC output from 4010 or NAC Extender

– Coil supervision module, one per RAC

– Maintenance Switch, one per RAC

– Abort Switch connected via an addressable interface module