Siemens U-S17-W-C Ceiling Strobe

Siemens U-S17-W-C Ceiling Strobe

All signaling appliances must installed following all applicable national and local fire alarm codes and any other required regulatory agency.

The U-( ) series suitable for mounting on a standard 1-gang, 2-gang, or 4″ square electrical box or on an FBX surface box.

These strobe lights must connected to a compatible signal circuit

These strobe lights designed for regulated filtered power supplies or full-wave rectified unfiltered power supplies.

As with all fire equipment periodic testing required (REef NFPA 72).

Siemens U-S17-W-C Ceiling Strobe

Use average currents to determine the maximum number of strobes per circuit.

-S17S, -S30S and -S60S. tested for 75 cd. on axis.

ADA Minimum Frontal Light Output requirement is 75 cd.

U.L. 1971 Standard covers emergency signaling devices for the hearing impaired.

Distance to the ceiling: measured from the top of the signal light lens to the ceiling.

The values noted for required intensity: expressed in minimum candela-effective intensity.

These strobes: for indoor use only.

U-S17-W-C

The U-( ) series suitable for mounting on a standard 1-gang, 2-gang, or 4″ square electrical box or on an FBX surface box.

These strobe lights must connected to a compatible signal circuit

These strobe lights designed for regulated filtered power supplies or full-wave rectified unfiltered power supplies.

As with all fire equipment periodic testing required (REef NFPA 72).

U-S17-W-C

Use average currents to determine the maximum number of strobes per circuit.

-S17S, -S30S and -S60S were tested for 75 cd. on axis.

ADA Minimum Frontal Light Output requirement is 75 cd.

U.L. 1971 Standard covers emergency signaling devices for the hearing impaired.

Distance to the ceiling measured from the top of the signal light lens to the ceiling.

The values noted for required intensity expressed in minimum candela-effective intensity.

These strobes can be wall-mounted or ceiling-mounted.