Siemens ADAPT-PLATE
Designed for use with standard Fire Safety systems or other commercially available fire alarm systems.
The DT-135CL, DT-200CL, DT-135CS, DT-200CS, DT-135WP. And DT-200WP Thermal Fire Detectors a r e of the rate compensation/fixed temperature type. And a r e In all models the detector element – self-restoring after operation.
It – supplied in ratings of 135°F and 200°F. The Thermal Detector b e used to protect a maximum of 2,500 square feet, job conditions. And engineering judgment often dictates closer spacing to provide faster detection.
The Models DT-135CL and DT-200CL a r e used with Fire Safety low voltage systems. Where it – desirable to provide visual identification of an operated detector using an internally mounted incandescent lamp. These models lock in upon alarm and must – reset at the control panel.
The Models DT-135CS, DT-135WP, DT-200WP, and DT-200CS can – used with any fire alarm circuit of any manufacturer. Using open circuit direct shorting type units. These units do not contain a series-connected resistor or an indicator lamp. And do not lock in upon alarm.
Contact ratings are 6-125 VAC, 5 A; 6-25 VDC, 1 A125VDC, 0.5 A. The DT 135WP and DT-200WP a r e UL-listed and US Coast Guard-approved as weatherproof. They a r e furnished with leads through a 1/2″ NPT hub. That screws into a standard W.P. junction box cover with an epoxy-coated shell. UL and ULC Listed*, and NYMEA, CSFM, and City of Chicago Approved*. *Pending Adapter Plate only.
Siemens ADAPT-PLATE
Reviews
There are no reviews yet.