Potter PAD100-DUCTR Addressable Duct Detector

Potter PAD100-DUCTR

The PAD100-DUCTR duct smoke detector provides early detection of smoke and products of combustion. Present in the air moving through HVAC ducts in commercial, industrial, and residential applications. The PAD100-DUCTR i s designed and built to meet all local requirements. And the NFPA regulations regarding duct smoke detectors.
Air sampling i s accomplished by two tubes that protrude into the duct. An exhaust tube of one standard length (7″) i s supplied in the installation kit with the smoke duct unit. The air intake sampling tubes must b e ordered. Sampling tubes a re supplied in three standard lengths: 2.5 ft., 5 ft., and 10 ft. And cut to size to fit the duct. Mounting the duct smoke unit i s accomplished by the use of a template. And 2 sheet metal screws, which a re provided. Mounting c an b e achieved without the removal. Of the clear cover which i s secured by 4 capture screws.

All PAD protocol detectors and modules require an address b efore connection to the panel’s SLC loop. Each PAD device’s address i s set by changing the dip switches located on the device. PAD device addresses a re comprised of a seven (7) position dip switch. Used to program each device with an address ranging from 1–127.

Potter PAD100-DUCTR

Datasheet

Relative Item