Notifier RP-2001

Notifier RP-2001. Refurbished, fully functional, without metal box/cabinet.

The RP-2001 is a six-zone FACP for single and dual-hazard deluge and preaction applications. It provides reliable fire detection, signaling, and protection for commercial, industrial, and institutional buildings requiring water-based releasing.

The RP-2001 is compatible with System Sensor’s i3 detectors, which are conventional smoke detectors. These can transmit a maintenance trouble signal to the FACP indicating the need for cleaning and a supervisory ‘freeze’ signal. When the ambient temperature falls below the detector rating of approximately 45°F (7.22°C).

The control panel is compatible with conventional input devices. Like two-wire smoke detectors, four-wire smoke detectors, pull stations, water flow devices, and tamper switches. And other normally open contact devices. Refer to the Notifier Device Compatibility Document for a complete listing of compatible devices.
Four outputs are programmable as NACs (Notification Appliance Circuits) or releasing circuits. Three programmable Form-C relays (factory programmed for Alarm, Trouble, and Supervisory) and 24 VDC special application resettable and non-resettable power outputs are included on the main circuit board. The RP-2001 supervises all wiring, AC voltage,
battery charger and battery level.
Activation of a compatible smoke detector or any normally open fire alarm initiating device. Will activate audible and visual signaling devices, illuminate an indicator, display alarm information on the panel’s LCD, sound the piezo sounder at the FACP, and activate the FACP alarm relay. And operate an optional module used to notify a remote station or initiate an auxiliary control function.
The RP-2001E offers the same features as the RP-2001 and allows connection to 240 VAC. The information in this data sheet applies to the 120 VAC and
240 VAC versions of the panels.

Datasheet

Relative Item