Notifier FCPS-24S6 Fire Alarm Power Supply. (New w/ Cabinet)

New with metal box/cabinet.

The FCPS-24S6 Series (6-amp) and FCPS-24S8 Series (8-amp) are remote power supplies with battery charger. The FCPS-24S6/24S8 may be connected to any 12 or 24 volt fire alarm control panel (FACP) or may be used as stand-alone supplies. Primary applications include notification appliance circuit (NAC) expansion (to support ADA requirements and NAC synchronization) or auxiliary power to support 24 volt system accessories. The FCPS-24S6/-24S8 provides regulated and filtered 24 VDC power to four notification appliance circuits configured as either four Class B (Style Y) or Class A (Style Z, with ZNAC-4 option module). Alternately, the four outputs may be configured as all non-resettable, all resettable or two nonresettable and two resettable. The FCPS-24S6/-24S8 also contains a battery charger capable of charging up to 18 AH batteries. The FCPS-24S6C and FCPS-24S8C are ULC-listed.

Features
• UL-Listed NAC synchronization using System Sensor®, Wheelock ®, or Gentex® “Commander2” appliances
• Operates as a “sync-follower” or as a “sync-generator” (default) See note on page 2.
• Contains two fully-isolated input/control circuits – triggered from FACP NAC (NAC expander mode) or jumped permanently “ON” (stand-alone mode)
• Four Class B (Style Y) or four Class A (Style Z, with ZNAC-4 module) NACs
• 6-amp (FCPS-24S6) or 8-amp (FCPS-24S8) full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864)
• 4-amp (FCPS-24S6) or 6-amp (FCPS-24S8) continuous output in stand-alone mode (UL 1481)
• Compatible with coded inputs; signals passed through
• Optional power-supervision relay (EOLR-1)
• In stand-alone mode, output power circuits may be configured as: resettable, (reset line from FACP required), non-resettable, or a mix of two and two
• Fully regulated and filtered power output – optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power
• Power-limiting technology meets UL power-limiting requirements
• Form-C normally-closed trouble relay
• Fully supervised power supply, battery, and NACs
• Selectable earth fault detection
• AC trouble report selectable for immediate 2-hour delay
• Works with virtually any UL 864 fire alarm control which utilizes an industry-standard reverse-polarity notification circuit (including unfiltered and unregulated NAC power)
• Requires input trigger voltage of 9 – 32 VDC
• Self-contained in compact, locking cabinet – 15”H x 14.5”W x 2.75”D (cm: 38.1H x 36.83W x 6.985D)
• Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batteries
• Battery charger may be disabled via DIP switch for applications requiring larger batteries
• Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1mm2) wire

Datasheet