Fire-Lite Emergency Command Center ECC-50/100 (New w/Cab)

Fire-Lite ECC-50/100 New with metal box/cabinet.

The Fire•Lite Emergency Command Center ECC-50/100 is a single-channel, 50-watt, 25 VRMS, emergency voice evacuation panel. That may be used for fire applications, and mass notification applications. The Emergency Command Center comes standard with one speaker circuit. The panel provides the ability to record fourteen field-programmable messages. Up to 60 seconds each with an integral microphone. Or from an external audio source. An integral power supply with a battery charger supplies operational power. A 50-watt audio amplifier is built into each panel. An optional second 50-watt amplifier (ECC-50W-25/70V) is available for backup purposes or to provide an additional 50 watts. The backup amplifier is available in 25 volts or 70 volts. Depending on which application is necessary.
Automatic activation of the Emergency Command Center by an FACP is possible via eight Command Input Circuits (CMD). Or via the ACS/ANN Bus serial communications link. From the MS-9600(UD)LS and MS-9200UDLS FACPs.
Two Command Input Circuits can be independently field programmed. For activation by an FACP Notification Appliance Circuit reverse polarity. Or by closure of a supervised normally open contact and six Command Input Circuits activate on contact closure. CMD 1 and CMD 2 provide terminals for NAC input and output. To allow installation of the audio panel anywhere along the NAC circuit being used to activate it.

Datasheet

Relative Item