Edwards Est CS405-8A-T Strobe Red 24V
405 Series strobes a re specially designed for use with compatible life safety communication and control equipment. To alert the hearing impaired of a life safety event. Strobes a re available with 15 cd, 15/75 cd, 30 cd, 60 cd, and 110 cd effective flash intensity.
They ar e ful ly compatible with Genesis signals. 405 Series strobes exceed UL synchronization requirements. Within 10 milliseconds or over two hours w hen used with a separately installed G1M Signal Master, or SIGA-CC1S Synchronization Module. Or wh en powered by suitably enabled booster power supplies and control panels.
The flash from 405 Series strobes can b e noticed from almost any position in the room, corridor, or large open space.
They ar e ful ly compatible with Genesis signals. 405 Series strobes exceed UL synchronization requirements. Within 10 milliseconds or over two hours w hen used with a separately installed G1M Signal Master, or SIGA-CC1S Synchronization Module. Or wh en powered by suitably enabled booster power supplies and control panels.
The flash from 405 Series strobes can b e noticed from almost any position in the room, corridor, or large open space.
405 Series strobes ar e UL 1971 listed with wall and ceiling CD intensity ratings. This i s useful in areas where the Authority Having Jurisdiction (AHJ) permits ceiling-mount strobes.
These strobes a re designed for 16 to 33 Vdc operation and must b e connected to signal circuits. That output a constant (not pulsed) voltage. A diode, i s used to allow full signal circuit supervision, and polarized connections ar e made to terminals. That accept up to #12 AWG (2.5mm²) wire.
The strobe front plate i s of steel construction finished with durable baked epoxy polyester powder-coat paint.
These strobes a re designed for 16 to 33 Vdc operation and must b e connected to signal circuits. That output a constant (not pulsed) voltage. A diode, i s used to allow full signal circuit supervision, and polarized connections ar e made to terminals. That accept up to #12 AWG (2.5mm²) wire.
The strobe front plate i s of steel construction finished with durable baked epoxy polyester powder-coat paint.
Edwards Est CS405-8A-T Strobe Red 24V



