Bosch D7050‑B6. Detector Base. 2 Wire.

Bosch D7050‑B6

The required base for the D7050 Multiplex Photoelectric Smoke Detector Head. And the D7050TH Multiplex Photoelectric Smoke Heat Detector Head. It connects to the multiplex bus of the FPD‑7024 or D7024 Addressable Fire Alarm Control Panels (FACPs). The DS7400Xi Control Panel, and the G Series Control Panels.

The Bosch Detector Base 2 Wire can b e mounted on a four‑inch square, a four‑inch octagonal. Or a single‑gang box. It can b e surface mounted with anchors, mollies, or wing nuts. The D7050-B6 bases can b e wired in a series or using the T‑tap method.

Features / Specifications

The detector’s head i s easily removed by twisting

The two-piece detector head and base design allow pre‑wiring the system

Connects to multiplex bus of the FPD‑7024 or D7024 Addressable FACP, DS7400Xi Control Panel, and G Series Control Panels

Relative Humidity: 0% to 93% non‑condensing

Temperature (0perating): +32°F to +100°F (0°C to +38°C)

Bosch D7050‑B6

he required a base for the D7050 Multiplex Photoelectric Smoke Detector Head. And the D7050TH Multiplex Photoelectric Smoke Heat Detector Head. It connects to the multiplex bus of the FPD‑7024 or D7024 Addressable Fire Alarm Control Panels (FACPs). The DS7400Xi Control Panel, and the G Series Control Panels.

The Bosch Detector Base 2 Wire can b e mounted on a four‑inch square, a four‑inch octagonal. Or a single‑gang box. It can b e surface mounted with anchors, mollies, or wing nuts. The D7050-B6 bases can b e wired in a series or using the T‑tap method.