Notifier AMPS-24 Addressable Power supply (NEW)

Notifier AMPS-24. (NEW)

An addressable power supply and battery charger with up to three 24 VDC outputs. It operates in FlashScan® or CLIP (Classic Loop Interface Protocol) mode. With the NFS-3030/NFS2-3030 Fire Alarm Control Panel (FACP). It can be used as the primary power supply for the NCA-2 Network Control Annunciator.

Features & Benefits:

Addressable by NFS-3030/NFS2-3030 FACP.

Selectable charging current charges 7 AH to 200 AH batteries.

Isolated Signaling Line Circuit (SLC) interface.

Trouble bus input for use with normally open dry contacts or open-collector circuits.

USB Type B connector for programming installation parameters.

Brownout detection.

Battery/battery charger supervision.

Secondary Power Auxiliary Outputs: 24V @ 0.5A and 5V @ 0.15A.

AC loss detection and AC loss delay reporting.

Mounts in a CAB-4 Series enclosure, EQ Cabinet Series enclosure, BB-25, BB-100, or BB-200 Battery Backbox.

AUX 24V – provides filtered power-limited power for additional components. Refer to table above for configuration/ current information.

Secondary power (battery) charging circuit: Current-limited, sealed lead-acid battery charger which will charge 7 to 200 AH batteries. Selectable charging current: 1.0 A, 2.0 A or 5.0 A.

Secondary power auxiliary outputs.

Wire sizes: 10 AWG (5.26 mm²) to 22 AWG (0.326 mm²).

Battery fuse (F2): 15 A, fast-acting.

Datasheet

Relative Item