Gamewell FCI GF506R Fire Alarm Control Panel (New w/Cab)

Gamewell FCI GF506R. New with metal box/cabinet.

The Flex GF506R i s a six-zone FACP used for single. And dual hazard agent-releasing applications and provides reliable fire detection. It offers signaling and protection for commercial, industrial, and institutional buildings. That require agent-based releasing. The Flex GF506R i s compatible with the System Sensor’s i3 detectors.
The i3 detectors are conventional smoke detectors. That transmits a maintenance trouble signal to the FACP that indicates the need for cleaning. It transmits a supervisory ‘freeze’ signal. W hen the ambient temperature falls below the detector rating of approximately 45°F (7.22°C). The Flex GF506R control panel is compatible with the following conventional input devices:

Two-wire and four-wire smoke detectors

Pull stations

Water flow devices and tamper switches

Other normally-open contact devices

Four outputs a re programmable as Notification Appliance Circuits or releasing circuits. Three programmable Form-C relays. Factory programmed for Alarm, Trouble, and Supervisory. And the 24 VDC special application resettable and non-resettable power outputs are included on the main circuit board. The Flex GF506R supervises all wiring, AC voltage, battery charger, and battery level. The activation of a compatible smoke detector or any normally open fire alarm-initiating device will do the following:

Turn on audible and visual signaling devices

Light an indicator

Display alarm information on the panel’s LCD

Sound the piezo sounder at the FACP

Activate the FACP alarm relay

Operate an optional module used to notify a remote station or initiate an auxiliary control function

Datasheet

Relative Item