Fire-Lite MS-2410B Replacement Board

Fire-Lite MS-2410B Replacement Board

A 10-zone Fire Alarm Control Panel uses conventional input devices. The panel accepts water flow devices, two-wire smoke detectors, four-wire smoke detectors, pull stations, and other normally open contact devices. Outputs include two Notification Appliance Circuits (NACs), three standard Form-C relays (alarm, trouble, and supervisory). And an EIA-485 port to interface with remote annunciators and optional remote relay modules. The FACP is field programmable via the panel keypad. It supervises all wiring, AC voltage, and battery levels.

Product Features
10 Class B Initiating Device Circuits (IDCs)
All zones accept smoke detectors and any normally open contact device
Zones 1 – 8 configured as general alarm zones
Zones 9 – 10 can b e configured as smoke zones or supervisory alarm zones
Two Class B Notification Appliance Circuits (NACs)
Form-C Alarm Relay
3.6 amps of system power expandable to 6.6 amps
RTB Remote Trouble Buzzer

Remote Relay Option Module (ACM-8RF) providing one 5.0 amp relay per zone
Dress Panel coverplate (DP-2410B)
Built-in keypad for panel control and programming
24-volt operation
Trouble Reminder
Alarm Verification (zones 1 through 3 only)
Interfaces with Fire•Lite annunciators (requires LED-10IM Option Module)
 LED-10 Series Remote Annunciators provide red alarm and yellow trouble LEDs
Small backbox size 16.9” (42.9 cm) X 14.5” (36.8 cm) X 4.5” (11.43 cm)
Silence Inhibit Notification Appliance Circuits
Auto-Silence Notification Appliance Circuits
Fuseless design
Low AC voltage sense
Silent or audible Walktest

Datasheet

Relative Item