Bosch FCP-OC320-R470 Multi Sensor

Bosch FCP-OC320-R470 Multi-Sensor

The FCP-320/FCH-320 Conventional Automatic Fire Detectors work based on conventional technology. Temperature measurement with gas measuring technology at the highest configuration level.
This method uses state-of-the-art processing methods to evaluate the signals from the gas sensor. And scattered light sensors or thermal sensors.

Thanks to the higher information content of the multisensor detectors. The use of detectors – possible in environments where pure smoke detectors cannot be used.
Available configuration levels:
– FCP-OC320: Combined optical, gas-sensitive smoke detectors
– FCP-OT320: Combined optical, and thermal smoke detectors
– FCP-O320: Optical smoke detectors
– FCH-T320: Thermal detectors.
The detector’s timeless and innovative design is a result of the cooperation between engineers and designers. With this design, it is possible to reconcile the contradictory goals of a generous installation space and a small detector.
The placement of the individual display on the detector tip. The first externally visible characteristic of the installation-friendly development concept. The stable and robust detector base needs aligning.

It is suitable for surface and flush cable mounting and includes separate mounting points for dropped ceilings and concealed sockets. For surface mounting, the cable may be fed through on the side.
The integrated strain relief for inter-floor cables prevents the removal of cables from the terminal after installation. The terminals – easily accessible; a retainer for the end-of-line resistor – integrated. Cable diameters of up to 2.5 mm2 can – used.
Equipped with a damp room seal.
The 320 Series detectors – available with a 470 Ω alarm resistor or an 820 Ω alarm resistor. The operating voltage range – 8.5 V DC to 30 V DC. Which allows the detectors to – used with almost every common conventional fire panel.

Bosch FCP-OC320-R470 Multi-Sensor

Datasheet

Relative Item